4 I/O Channel Clear-Com / RTS Interface for OPTOCORE and SANE

8 channels of Intercom and data, which can be routed through OPTOCORE and SANE network.


V3R-FX-INTERCOM

V3R FX INTERCOM1280 back15

KEYFACTS:

  • 4 x 4-wire intercom ports
  • Integration with Clear-Com, RTS intercom
  • Matrix or Panel pinout
  • 32-bit transparent transport and routing
  • 2 x fiber SFP ports for redundant Optocore ring
  • 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
  • 4 x RS485/422
  • 2 x LAN
  • Word Clock I/O
  • Dual redundant PSU

Overview V3R-FX-INTERCOM:

V3R-FX-INTERCOM for Clear-Com/RTS was developed to enable direct interfacing between the Optocore open transmission and Clear-Com/RTS Matrix platforms allowing for a flexible audio based intercom transport solution. It is now possible to take advantage of all Optocore system features and benefits when communicating through an Eclipse Matrix intercom system. Based on the well known V3R-FX series architecture, with 1U height, the device is equipped with standard RJ45 interfaces, making cabling simple and cost-efficient. V3R-FX-INTERCOM offers not only intercom interfacing, but can be used also as analog audio Line-In and Line-Out device. 

Optocore's intercom device is seamlessly integrated into the OPTOCORE® OPTICAL DIGITAL NETWORK SYSTEM. Intercom messages and control data from Clear-Com/RTS user panel or matrix are sent transparently through the optical network. Each single intercom channel can be routed to every device in the network by the OPTOCORE CONTROL software.

Technical Specifications V3R-FX-INTERCOM:

INTERCOM ports Hardware standard: IC422/IC485: FCC-RJ45 4 x inputs, 4 x outputs
Analog Line Input Impedance 10 kΩ
  Maximum input level +18 dBu
  SNR 115 dB (A-weighted)
  THD+N @ -1dBFS ≥ 100 dB
Analog Line Output Impedance 45 Ω
  Maximum input level +18 dBu
  SNR 115 dB (A-weighted)
  THD+N @ -1dBFS ≥ 98 dB
Serial I/O    
 - IC422 EIA / TIA – 422  
 - IC485 EIA / TIA – 485  
SANE, LAN ports Convention  
Audio TIA – 568A/B, Optocore 200 Mbit/s
LAN TIA – 568A/B, IEEE - 802.3 10/100 Mbit/s
Auxiliary Ports Convention EIA / TIA-485  
Data channels Digital control data 4
Data rate   Up to 10 Mbps
Impedance Termination 330 Ω
  Source ≤ 10 Ω
Word clock Hardware standard 75 Ω / BNC  
Data rate Depending on used sample rate 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz
Impedance Output 75 Ω
  Input 1k / 75 Ω software switch
Optical Link Input, Output, Dual – Full bandwidth  
Connection   Duplex LC
Protocol   Optocore
Transmission   Full duplex
Data rate   2 x 2 Gbps
Optical wave guide cable lengths Multimode fibre 50 µm ≤ 700 m
  Monomode fibre 9 µm ≤ 70 km (on request)
Word clock Hardware standard 75 Ω / BNC  
Data rate 44.1 kHz – 192 kHz  
Power supply 2 (optional) independent power supplies with function check and automatic switch-over
Type Switch-mode, universal input
Mains voltage 100...240VAC, 50/60Hz, 25VA-typ, 32VA-peak
Remote Control    
RS232 / USB / Ethernet Control Interface to PC  
Dimensions   1 RU / 19”
W x H x D 483 x 44 x 200mm 19.0 x 1.73 x 7.87 inch
Weight 2.7 kg 6.0 lbs

Images V3R-FX-INTERCOM: